...
- Using an RS-232 cable, connect the printer or PC to the call logging (SMDR) port on the front of the controller.
- Launch the system tool.
- Choose from the selection menu.
- Click , click , and then click .
- Set the following parameters:
- Set the Cost per minute to 00. This functionality is not supported in NA systems.
- Set the Minimum call duration to be recorded to 00:00:00.
- Set the Type of calls to All .This should be the default.e
- Set the Minimum page length to 1.
- Enable call logging.
- Click .
- You will need to 'commit' your changes before they take effect.
...