...
- Reliable Protocol: n
- Packets Resp Timer: 30 (default value)
- Sessions Connect Message Cntr: 3 (default value)
- SPDU Cntr: 3 (default value)
- Connectivity Timer: 60 (default value)
Below you can find Here is an example of an ip-services configuration , Page (page 3):
| Screenshotmacro | ||||
|---|---|---|---|---|
|
Configuring system-parameters cdr
You will need to use Use the change system-parameters cdr command to amend the CDR format. As there are quite a few changes, we have supplied screenshots of each page and how it should be configured.Below you can find Page 1 of system-parameters cdr configuration:The following screenshots describe how the settings should appear on your system:
Page 1
| Screenshotmacro | ||||
|---|---|---|---|---|
|
Page 2 of system-parameters cdr configuration is as shown below:
| Screenshotmacro | ||||
|---|---|---|---|---|
|
Configuring trunk-group
To receive ensure that response times for incoming calls , you need to set are included in your CDR data, the CDR field for each trunk group must be set to r. You will need to use the This must be applied to all trunk groups using the following command:
change trunk-group X, 'X' being (where X is the trunk group number.Below you can find an example of )
An example trunk-groups configuration screen is shown below:
| Screenshotmacro | ||||
|---|---|---|---|---|
|
...