Alcatel OmniPCX Enterprise - IP connection

...

Configuring your SMDR output

Follow the instructions below to configure the SMDR output via a serial connection. These instructions are taken from the Alcatel OmniPCX Enterprise manual:

Using Telnet, connect to the IP address of your Alcatel OmniPCX Enterprise and follow the steps below:

1. Applications (Enter)
2. Accounting (Enter)
3. Review/Modify (Enter)
4. All Instance (F1)
5. Realtime ticket Output: Set this to ethernet. Note that if you don't have an appropriate license, you may only select V24 (serial) here.
6. Save changes and exit.

Below is an example of the data output from an Alcatel OmniPCX Enterprise:

Configuring TIM Enterprise

Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:

1. Click on the Directory tab.
2. Choose the PBX object you want to configure and click Properties.
3. A new window will open. In the General tab, select Alcatel 4400e from the Data format list and tick the Keep a local backup of data box, as shown below: 
   

   Screenshotmacro
   Border false URL /download/attachments/3276868/alcatel_omnipcx_enterprise_1.png

4. In the Connection tab, select Establish TCP connection to PBX from the Connection method list
5. In the Host field, enter the IP address of your Alcatel OmniPCX Enterprise.
6. In the Port field, enter 2533 as the default port number for this PBX.
7. Leave the Username and Password fields blank.
8. In the Connection script field, select Alcatel OmniPCX Enterprise 7.1+ from the drop-down list.
9. Click on the Save button to apply the changes.
   

   Screenshotmacro
   Border false URL /download/attachments/12589516/alcatel_omnipcx_enterprise_active.png