These step-by-step instructions will guide you through the process of configuring You can configure your 3CX phone system to seamlessly work smoothly connect with TIM Plus using utilising our CXD connection by following these step-by-step instructions.

When using CXD, you can skip You can forego setting up or configuring the SMDR output on the 3CX phone system while utilising CXD. CXD functions produces improved call logs since it runs independently and relies on live events to provide depends entirely on real-time events for all the necessary information for its operation, resulting in enhanced call logsinformation it needs to function.

This is beneficial as it overcomes the limitations on data output found in the native CDR when using the standard advantageous since it gets around the native CDR's data output restrictions that occur with using the Active or Listening connection methods.

Getting CXD

To obtain a copy of CXD, please log a Please submit a support ticket using through our on-line online Gateway or send an email to support@tri-line.com. The support team will need to assist with the installation of the CXD server to ensure to request a copy of CXD. To guarantee that the 3CX live events are collected correctly appropriately captured and integrated linked with TIM Plus, the support team will need to help with the CXD server installation.

Installing CXD

To access CXD, you will need to download it from our Gateway site. Please note that there are two installation options available: one for Windows and another for Linux. The correct installation will depend on whether it is to be installed on a local server or 3CX. You need Linux if installing on the 3CX Server.

At the conclusion of the installation, you will encounter a final wizard that will prompt you to provide the following information:

• IP address of the 3CX phone system
• Primary/route account username (SSH access)
• Password for Primary account

The details provided during the final wizard are not stored and are solely used for the setup process. Your system does not alter the configuration of the phone system itself; it only uses the information to establish the connection without making any permanent changes.

When using CXD, there is no need to configure the SMDR (Station Message Detail Recording) output on the 3CX phone system. CXD operates independently and does not rely on or require SMDR configurations to function effectively. It provides the necessary information and data for its own operation, simplifying the setup process and removing the need for additional SMDR configurations.

Configuring TIM

1. To add a site, click on the 'Directory' tab.
   
2. Select PBX
3. Select '3CX Events' from the PBX drop-down list.
4. Select 'CXD' as the connection method.
5. Fill in the host, port and password details as shown below;