Panasonic KX-TA/TE

...

...

1. Set the System Program Switch to on the EMSS From the back of the phone, set this to ProgramEMSS Control Unit to the

   Buttonmacro
   Label Programming

    position.
2. Press -* followed by the # key, then enter your system password.
3. Press ## to enter the

   Referencemacro
   Label Programming mode

   .

4. Go to programming code 800 and set each of the settings fields as shown below. Press  Store and then Next after each entry , in order to move to the next settingfield:

   SMDR field	Value
   NL-Code	CR+LF
   Baud Rate	9600
   Word Length	8 bits
   Parity	None
   Stop Bit	1 bit

5. Go to programming code 801 and set each of the settings fields as shown below. Press Store and then Next after each entry , in order to move to the next settingfield:

   SMDR field	Value
   Page Length	Leave as default
   Skip Perf	Leave as default

6. Go to programming code 802 and set each of the settings fields as shown below. Press Store and then Next after each entry , in order to move to the next settingfield:

   SMDR field	Value
   Outgoing	On
   Incoming	On

7. From Set the back of the phone, set this back to Store System Program Switch back to Store position.

<a id="Install NetPBX"></a>

...

The Panasonic KX-TA/TE phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you first need to install the NetPBX netpbx software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

...

1. Click on the Directory tab.
2. Choose the site you want to configure and click Properties.
   

   Screenshotmacro
   Border false URL /download/attachments/48170964817097/panasonic_kx_ta_1.png

3. In the Site Properties window, select select Panasonic KX Family-TD Series from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings

...