You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Cisco UCME / UC500 to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus captures SysLog packets from this PBX.
Support Files
Cisco UCME - SysLog.TDT
Cisco UCME - SysLog.TDS
Required Tasks
Configure UCME to send SysLog events
Configure Cisco AXL sync
Configure TIM Plus to capture RADIUS packets
Configure UCME to send SysLog events
Login to your Cisco UCME / UC500 via telnet, as shown below:
Now just enter the following SysLog commands:
| Step | IOS commands | Description |
|---|---|---|
| 1 | enable | Enter EXEC mode, enter password if requested. |
| 2 | conf t | Enter global configuration mode. |
| 3 | aaa new-model | Enable aaa accounting mode. |
| aaa accounting connection h323 start-stop group SysLog | ||
| gw-accounting syslog | ||
| acct-template callhistory-detail | ||
| 4 | logging 192.168.1.1 | Specifies the IP address to send CDR data. Where '192.168.1.1' is the machine running TIM Plus. |
| 5 | end | Exit configuration mode. |
| 6 | wr | Save changes. |
Labels: