You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your SnomOne phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus listens for connections from this PBX.
Support Files
SnomONE.TDS
SnomONE.TDT
Required Tasks
Configure the SMDR output
Configure TIM Plus
Configure the SMDR output
The Snom telephone system can be configured to send its CDR records via a TCP/IP connection. To configure the output, enter the IP address and port number of the PC running TIM Plus in the CDR URL settings, as shown below
To configure the CDR format, refer to the table below. TIM Plus requires to use the Long format.
Labels: