Aastra BP

These instructions should assist in configuring your Aastra BP to work with TIM Plus. If you are not familiar with PBX configuration, please contact your system maintainer.

Connection information	Description
Connection type	Serial Output: As the Aastra BP sends SMDR information via a serial connection which is located on BP unit itself. You will need to directly connect a serial cable from the Aastra BP to the PC that NetPBX is installed and running on.
Cable configuration	Null-modem/Crossover.

Configuring your SMDR

BP firmware R12 or older

If you are using firmware which is older than R12, you need to setup the SMDR output to CIL3.

BP firmware R13+

If you are using firmware R13+, you will need to set the SMDR output to 'Flexible CIL' and configure the options as below:

Configuring TIM Plus

Below you will find steps on how to configure TIM Plus to listen for SMDR data from your Aastra BP:

Browse to TIM Plus as normal and login with your credentials.
Click on the Directory tab.
Click on the site configured during the setup wizard and click Propertiesor create a new site and click Properties.

Within the Site Properties window, select Aastra BP from the PBX model drop-down list.
From the Connection method drop-down list, select No connection required.
Finally, click on the Save button.